-
×
Pirate's Scroll Holder
Downloadable- Sold by:
-
×
Scribe's Scroll Holder
Downloadable- Sold by:
-
×
Cart - Two Wheel Wagon
Downloadable- Sold by:
Subtotal: €34,29
Gracewindale
New Zealand
Showing 21–40 of 45 results
-
STL
Camp Cooking
A cozy campsite prop for RPGs and skirmish tables: a wood tripod with a hanging pot over a stone-ring fire.
Native size is about 30 x 30 x 42 mm.
Clean, manifold mesh, pre-oriented.
Prints well on resin; on FDM use light supports under the pot and chain. Fast to paint, instant “someone burned the stew” energy.
SKU: n/a -
STL
Candle Holders Set
Candle Holders Set – a classic trio of turned-style candle stands sized for tealight, taper, and small pillar candles.
Native heights are 11 cm, 15 cm, and 16 cm. Clean, manifold models, pre-oriented for FDM.
Most printers handle these with no supports; add light supports under the plate lip if your setup prefers it.
Paint to taste for tabletop decor, dioramas, or a quick gothic centerpiece.
For safety, use LED candles or keep real flames well clear of printed plastic.
IMPORTANT! Any plastic will melt or burn if you leave the candle unattended long enough for the candle to burn out. Protect the candle holder with a piece of foil wrapped around the bottom of your candle to avoid burning your house.
The creator will not accept responsibility for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) suffered by any person related to any use of the Digital Model or any its part.
SKU: n/a -
STL
Canopy Market Stall
A wooden market stand with rope details, bench, and a draped canopy. Perfect for town squares, bazaars, and selling slightly suspicious apples.
Native size is 52 x 59 x 68 mm.
Clean, manifold mesh and pre-oriented.
Resin printers:
-
Includes presupported version for resin printing.
FDM printers:
-
Print with tree or custom supports and a brim.
-
Recommended layer height: 0.1 mm
-
Infill: 30-40%
SKU: n/a -
-
STL
Canvassed Market Stall – Covered Vendor Booth
A rustic market stand with rope details, a bench shelf, and a textured canvas cover. Ideal for town squares, bazaars, and selling absolutely legitimate potions that definitely do not turn you into a newt.
Native size is 54 x 57 x 65 mm.
Clean, manifold mesh and pre-oriented.
Prints great on resin; on FDM most setups only need light supports under the canvas overhang and inner arch.
Resin printers:
-
Includes presupported version for resin printing.
FDM printers:
-
Print with tree or custom supports and a brim.
-
Recommended layer height: 0.1 mm
-
Infill: 30-40%
SKU: n/a -
-
STL
Cart – Two Wheel Wagon
A rustic two wheel cart for village roads and market runs.
Split for easy printing and painting: bed with rails, twin shafts, yoke, axle block, two wheels, and a simple pin. Clean, manifold mesh and pre oriented. Perfect for hauling firewood, loot, or a very confused goblin.
Native size is 82 x 43 x 33 mm.
SKU: n/a -
STL
Cart with Goods
A sturdy two wheel cart already loaded with pots and barrels, ready for market runs or midnight heists.
Native size is 74 x 40 x 43 mm.
Split for easy printing and painting: loaded bed with rails, twin shafts, yoke, axle block, two wheels, and a simple pin.
Clean, manifold mesh and pre oriented. Prints great on resin; on FDM most setups only need light supports under the rope loops, wheel spokes, and the yoke arch. Ideal as town scatter or as an objective piece when someone forgets to pay road tax.
SKU: n/a -
STL
Cart with Hay
A farm cart stacked with hay bales for village roads, stables, and ambushes that end with someone yelling, “It looked softer than that.”
Native size is 74 x 43 x 43 mm.
Split for easy printing and painting: loaded bed with rails and hay, twin shafts, yoke, axle block, two wheels, and a simple pin.
Clean, manifold mesh and pre oriented.
Prints great on resin; on FDM most setups only need light supports under the rope loops, bale overhangs, and the yoke arch.
SKU: n/a -
STL
Cauldron Dice Cup
A chunky cauldron with a removable lid and optional ring handles, sized as a roomy dice cup.
Native size is 113 x 113 x 90 mm.
Parts included: body, lid, two separate rings.
Clean, manifold mesh and pre oriented.
Prints great on resin; on FDM most setups only need light supports under the ring lugs and lid handle.
The interior easily fits several dice sets, tokens, or the ashes of a nat 1.
SKU: n/a -
STL
Cauldron Spice Jar
A cute cauldron jar with a removable lid, perfect for herbs, salts, or table candy between dungeon crawls. Big enough to put a 3cm led tealight inside (about 6cm in diameter, 5cm height).
The set includes a clean, manifold body and a matching lid, both pre oriented for easy printing.
For food contact, use a liner or a food-safe coating, since raw printed plastic is not food safe. Paint as iron, copper, or a witchy enamel and let the seasoning bonus be mostly psychological.
For tabletop games print at about 20% scale.
SKU: n/a -
STL
Cave Rocks Set
Set of cave terrain for your underground adventures
Rocky scatter for caverns, mines, and dungeons. This set includes varied formations like boulders, cracked slabs, ridges, and stalagmite clusters for quick line of sight blocks and objective cover.
Perfect when the party asks for a cave and you need believable ground dressing fast.
SKU: n/a -
STL
Dark Lord’s Scroll Holder
Our 3D printable character sheet holder is not only cool but also incredibly handy and modular. It keeps all your essentials in one place, making your gaming experience more organized and convenient.
You can store your character sheet, notes, dice, pencils in a single case. Display it, and use as a storage for anything that can be rolled!
Multocolor printing supported (3MF files included)
This is not a physical item. You will receive a digital 3D model in STL format for 3D printing.
SKU: n/a -
-
STL
Knight’s Scroll Holder
Our 3D printable character sheet holder is not only cool but also incredibly handy and modular. It keeps all your essentials in one place, making your gaming experience more organized and convenient.
You can store your character sheet, notes, dice, pencils, and even a mini in a single case. Display it, use as a tube for anything that can be rolled or fight with it!
Multocolor printing supported (3MF files included)
This is not a physical item. You will receive a digital 3D model in STL format for 3D printing.
Read more here
SKU: n/a
